- Interchangeable lower arm for front, rear, left and right.
- - Smooth movement suspension by hard coated 5mm lower arm pivot balls and high quality bushing.
- -
Graphite lower arm length (track width) adjustable by difference
orientation of steering block pivot ball holder, four length was
selectable by two different holders.
- - Front and rear aluminium lower shock mount.
- - Front and rear steering block made by high grade 7075 aluminium and interchangeable.
- - Front and rear steering plate swap for two difference steering response setup.
- - Large size 6x11x4mm ball bearing used in inner of steering block for more reliable and efficiency.
- - Spring steel front double joint drive shaft, and 7075 aluminium rear swing shaft.
- -
Interchangeable front and rear upper aluminium bulkheads. Front caster
4/5 deg, rear caster 0/1 deg adjustable by different orientation of
bulkheads.
- -
Mounted the pivot balls by screws through a groove and a thread on
bulkhead. Upper arm free movement adjustable for active caster setting
simply.
- - New lower bulkheads install with upper bulkheads with centering insert and make more reliable.
- - Laser engraved marking on bulkhead for easy identify differential position.
- - Lower position of front and rear anti-roll bar mounting.
- - New
single piece design motor mount with Multi-Flex Chassis adjustment.
Featured adjustable front and rear belt tensioners and battery
backstops.
- - Shock tower composed by two pieces, easy installation and tweak free alignment.
- - Precise shock angle adjustment by shim.
- - Shock tower mounted to chassis for more stability and improved the traction.
- - 7075 aluminium lightweight hardened wheel hub.
- - 7075 aluminium steering centre plate and steering arms with ball bearings.
- - 7075 aluminium lightweight floating servo mount.
- - Power HD S15X servo is able to mounted directly.
- - Swap the graphite battery holders to change the battery forward/backward position.
- - Quick release battery backstop and height adjustable to compatible difference size battery
- - Battery placement fully fine adjustable.
New parts in the Destiny RX-10SR 3.0R touring car kit:- New high grade graphite main chassis. Manufactured by RC Maker
- New Lightweight front spool set
- New Lightweight rear gear differential set
- New titanium camber screw M3x18mm
- 3x7x2mm aluminum lower arm spacer set
- New graphite front and rear steering plate set
- New single piece upper deck
- New wave shape graphite front brace
- Interchangeable lower arm for front, rear, left and right.
- - Smooth movement suspension by hard coated 5mm lower arm pivot balls and high quality bushing.
- -
Graphite lower arm length (track width) adjustable by difference
orientation of steering block pivot ball holder, four length was
selectable by two different holders.
- - Front and rear aluminium lower shock mount.
- - Front and rear steering block made by high grade 7075 aluminium and interchangeable.
- - Front and rear steering plate swap for two difference steering response setup.
- - Large size 6x11x4mm ball bearing used in inner of steering block for more reliable and efficiency.
- - Spring steel front double joint drive shaft, and 7075 aluminium rear swing shaft.
- -
Interchangeable front and rear upper aluminium bulkheads. Front caster
4/5 deg, rear caster 0/1 deg adjustable by different orientation of
bulkheads.
- -
Mounted the pivot balls by screws through a groove and a thread on
bulkhead. Upper arm free movement adjustable for active caster setting
simply.
- - New lower bulkheads install with upper bulkheads with centering insert and make more reliable.
- - Laser engraved marking on bulkhead for easy identify differential position.
- - Lower position of front and rear anti-roll bar mounting.
- - New
single piece design motor mount with Multi-Flex Chassis adjustment.
Featured adjustable front and rear belt tensioners and battery
backstops.
- - Shock tower composed by two pieces, easy installation and tweak free alignment.
- - Precise shock angle adjustment by shim.
- - Shock tower mounted to chassis for more stability and improved the traction.
- - 7075 aluminium lightweight hardened wheel hub.
- - 7075 aluminium steering centre plate and steering arms with ball bearings.
- - 7075 aluminium lightweight floating servo mount.
- - Power HD S15X servo is able to mounted directly.
- - Swap the graphite battery holders to change the battery forward/backward position.
- - Quick release battery backstop and height adjustable to compatible difference size battery
- - Battery placement fully fine adjustable.
New parts in the Destiny RX-10SR 3.0R touring car kit:- New high grade graphite main chassis. Manufactured by RC Maker
- New Lightweight front spool set
- New Lightweight rear gear differential set
- New titanium camber screw M3x18mm
- 3x7x2mm aluminum lower arm spacer set
- New graphite front and rear steering plate set
- New single piece upper deck
- New wave shape graphite front brace
- Interchangeable lower arm for front, rear, left and right.
- - Smooth movement suspension by hard coated 5mm lower arm pivot balls and high quality bushing.
- - Graphite lower arm length (track width) adjustable by difference orientation of steering block pivot ball holder, four length was selectable by two different holders.
- - Front and rear aluminium lower shock mount.
- - Front and rear steering block made by high grade 7075 aluminium and interchangeable.
- - Front and rear steering plate swap for two difference steering response setup.
- - Large size 6x11x4mm ball bearing used in inner of steering block for more reliable and efficiency.
- - Spring steel front double joint drive shaft, and 7075 aluminium rear swing shaft.
- - Interchangeable front and rear upper aluminium bulkheads. Front caster 4/5 deg, rear caster 0/1 deg adjustable by different orientation of bulkheads.
- - Mounted the pivot balls by screws through a groove and a thread on bulkhead. Upper arm free movement adjustable for active caster setting simply.
- - New lower bulkheads install with upper bulkheads with centering insert and make more reliable.
- - Laser engraved marking on bulkhead for easy identify differential position.
- - Lower position of front and rear anti-roll bar mounting.
- - New single piece design motor mount with Multi-Flex Chassis adjustment. Featured adjustable front and rear belt tensioners and battery backstops.
- - Shock tower composed by two pieces, easy installation and tweak free alignment.
- - Precise shock angle adjustment by shim.
- - Shock tower mounted to chassis for more stability and improved the traction.
- - 7075 aluminium lightweight hardened wheel hub.
- - 7075 aluminium steering centre plate and steering arms with ball bearings.
- - 7075 aluminium lightweight floating servo mount.
- - Power HD S15X servo is able to mounted directly.
- - Swap the graphite battery holders to change the battery forward/backward position.
- - Quick release battery backstop and height adjustable to compatible difference size battery
- - Battery placement fully fine adjustable.
New parts in the Destiny RX-10SR 3.0R touring car kit:- New high grade graphite main chassis. Manufactured by RC Maker
- New Lightweight front spool set
- New Lightweight rear gear differential set
- New titanium camber screw M3x18mm
- 3x7x2mm aluminum lower arm spacer set
- New graphite front and rear steering plate set
- New single piece upper deck
- New wave shape graphite front brace
DESTINY RX-10SR 3.0R 1/10 SCALE COMPETITION TOURING CAR KIT
- Brand: Destiny
- Product Code: DRX-00015
- Availability: 1
- S$750.00
-
S$710.00